nstallation Steps

(1) Remove aerator from faucet.

(20Replace with diverter valve. Tighten top collar with pliers to ensure leak-free seal. Note: If the diverter valve does not fit your faucet, please use the supplied adapter and washer or obtain the proper adapter at your local hardware store. If diverter valve leaks just below upper rotating collar, replace existing washer with supplied washer, or obtain a thicker washer from your local hardware store or contact Paragon Water for assistance.

(3) Push double O-ring end of spout into hole in the top of the filter housing. Turn spout so it is over sink.

(4)Turn on cold water at the faucet.

(5)Turn bypass control on diverter valve.

(6) Run water through unit for 30 minutes to purge entrapped air and carbon fines from the unit.

(7) Toggle the bypass control to select filtered or non-filtered water..